0040_[New] Long WD Tilt Sensor

This product is a Laser Autocollimetor with excellent performance of 1,000mm±150mm working distance (WD).It can also measure with a working distance of up to 10m.

 

It can also measure with a working distance of up to 10m.
The combination of the optical system and signal processing part enables simultaneous high-speed measurement of tilt (θX, θY) (1,600 times/second) with this single solution.
Special note should be made of its long working distance, which allows tilt measurements to be placed on the floor or ceiling of the equipment in which it is to be installed. This characteristic allows for installation in equipment, as well as inspection and adjustment of long-distance moving mechanisms and evaluation equipment for long-distance sensing devices.
This solution is also designed for easy installation.
For more information, please see this video.

Please also refer to the following documents

【●Long WD Tilt Sensor Documentation】

Application examples are also available.
Case studies in the semiconductor industry are also available.

【●Semiconductor Industry Case Study】

 

Our latest displacement tilt sensor is the product of our cutting-edge technology.

This product boasts outstanding performance thanks to the complete integration of the optical system and signal processing part. One of its remarkable features is its ability to measure tilt (θX, θY) displacement (Z) at high speed and simultaneously.
Data can be measured in real time at an impressive rate of 1,000 cycles/second.
This displacement-tilt sensor will be a revolutionary advance in the industry. Its integrated technology enables 3-axis measurement in a single solution, increasing productivity and accuracy.
Its high-speed measurement minimizes process downtime and supports efficient operations.

For more information, please refer to the following documents

【●Integrated Displacement/Tilt Sensor Documentation】

Please refer to the following document for application examples.

【●Semiconductor industry case studies】

オートコリメータ
This product is an integrated optical sensor with a signal processor built into the housing. Since the measured values are output from the main body of the optical sensor, it takes up less space and allows for a greater flexibility in the installation of equipment.
For example, it can be used to prevent crashes during semiconductor wafer handling and to monitor wafer warpage.
Compared to conventional integrated tilt sensors, the new product is smaller in size and achieves a high measurement speed of 1,600 times/second.
For details, please refer to the following document.

【●Integrated Tilt Sensor Documentation】

In addition to this product, we are developing many other inspection and measurement devices for semiconductors.
Please refer to the application examples below.

【●Examples in the semiconductor industry】

Autocollimator is a kind of optical measurement sensor, a solution mainly available for adjustment and evaluation of optical systems.
It enables non-contact tilt measurement simply by pointing the measurement light on the object to be measured.
This solution enables optimization of optical equipment by accurately measuring and adjusting the optical axis and optical path of optical systems.
In particular, it is used to precisely adjust the position and tilt of lenses, mirrors, and other optical elements.
Autocollimators have long been used in the optical industry.
This product used a low-intensity halogen lamp.
Because of the low intensity of the light source, large diameter lenses were required to bring in a large amount of light into the device.
Therefore, the device was huge and heavy.
We have realized a compact, high-sensitivity, high-speed autocollimator by using a semiconductor laser as the light source and a semiconductor sensor as the detector.

オートコリメータ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our autocollimator (product name: ultra-compact tilt sensor. Our autocollimator (product name: ultra-compact tilt sensor, model: TM-2070) uses a high-brightness laser diode and compact optical components.
It can measure low reflection objects and minute objects that conventional autocollimators could not handle.
Furthermore, by receiving light with a CMOS camera, image processing is possible and numerical control of measurement data is possible.

レーザオートコリメータ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please dispel the image of autocollimators as large and heavy.
Try our ultra-compact tilt sensor TM-2070.
We have a demo unit ready and waiting for your contact.
For more information, please contact us from the following link.

We have achieved a measurement range (±15 deg.) that exceeds the ±10 deg. measurement range of our existing autocollimator.
This is the first non-contact optical sensor* in the world that employs the laser autocollimator method.
*As of April 2024, according to our own research.

超広角チルトセンサ(オートコリメータ)

 

 

 

 

 

 

Applications.
Measurement of actuators in cameras for smartphones, especially periscope cameras and camera module tilt OIS cameras.
Tilt angle inspection of the gimbal mechanism that moves the camera mounted on a drone.
Measurement of scanning mirrors mounted on LiDAR, etc.
Tilt angle inspection of MEMS mirrors etc.
Please see below for a demonstration of the measurement.
The object to be measured (mirror) is placed on a 2-axis gimbal, and the tilt angle of the gimbal is measured.
Measurement values are displayed.
The measurement value can also be output as a voltage at the same time.
(DC±5V=θ±15deg Sampling frequency: 10kHz)

If you are interested, please contact us from the following.